M PCB Manufacturer

sauri juya samfur zinariya plating PCB tare da Counter nutse rami

Short Bayani:

Nau'in abu: FR4

Countididdigar layi: 4

Traananan alamar nisa / sarari: mil 6

Holeananan rami girma: 0.30mm

Gama kaurin jirgin: 1.20mm

Gama kaurin jan karfe: 35um

Gama: ENIG

Solder mask mask: koren

Lokacin jagora: kwanaki 3-4


Bayanin Samfura

Alamar samfur

Nau'in abu: FR4

Countididdigar layi: 4

Traananan alamar nisa / sarari: mil 6

Holeananan rami girma: 0.30mm

Gama kaurin jirgin: 1.20mm

Gama kaurin jan karfe: 35um

Gama: ENIG

Launin murfin aljihu: koren ''

Lokacin jagora: kwanaki 3-4

quick turn prototype

Matakin fara samfuri shine lokaci mafi mahimmanci ga tsarin bincike da ci gaba.

Don rage lokacin bincike da ci gaba, kuna buƙatar masana'antar PCB don samar da samfuri da sauri.

Sa'annan samfurin saurin juyawa ya bayyana.

Don ƙera PCB, Kangna yana da ƙwarewar ƙera PCB sama da shekaru 14 (tun 2006). Zabar mu ba kawai zai iya rage lokacin masana'antar PCB ba amma ya rage farashin kuma ya samu alluna masu inganci. Zamu iya samar muku da ingantaccen samfurin samfuri tare da mafi kankantar lokacin samarwa a farashi mai tsada.

A yadda aka saba, idan jimillar yankin PCB ɗin da ba ta wari ba ta fi murabba'in mita 0.1 ba, za mu ɗauki tsari a matsayin samfuri.

Babu MOQ iyakance, koda koda kayi odar PCS guda ɗaya, zamu karɓi oda da mahimmanci.

Lokacin jagora na yau da kullun shine kwanaki 5 don gefe ɗaya da allon layi biyu, kwana 7 na Layer 4, kwana 9 na 6, kwana 10 na 8, kwana 12 na allon Layer 10.

Don samfur mai sauri, zamu iya gama samar da samfurin samfuri na gefe ɗaya da allon Layer biyu a cikin kwana ɗaya ko kwana biyu, kwanaki 3-4 na 4, kwanaki 4-5 na 6, kwana 5-6 na 8, 6 -7 kwanaki don jirgin allo na 10.

Thearancin ranar aiki shine, mafi tsada farashin.

Bayan karɓar odarka, injiniyanmu zai duba fayilolin Gerber ɗin ka don tabbatar da bin ƙa'idodin fasahar mu. Da zarar fayilolin sun wuce dubawa, zaku iya biyan kuɗin. Sannan injiniyan mu zai sake dubawa kuma ya inganta fayilolin don samarwa. Wasu lokuta wasu tambayoyin injiniya zasu tayar da hankali.

Don gama aikin akan lokaci, kuna buƙatar amsa tambayoyin injiniyoyi daga injiniyanmu akan lokaci da wuri-wuri.

Lokacin da aka ɓata akan tambayar injiniya ba a ƙidaya azaman lokacin samarwa ba.

Idan kayi oda bayan lokacin china P5.00, za a kirga lokacin samarwa daga gobe zuwa gobe.


  • Na Baya:
  • Na gaba:

  • Rubuta sakon ka anan ka turo mana

    RUKUNAN KAYAN KAYA

    Mayar da hankali kan samar da mafita don shekaru 5.